Question Locked

320 GB SATA Shows 160Gb In Windows 2000

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
I have a Dell GX-620 Machine having Windows Xp O/S every thing was working fine but when i install Windows 2000 My HDD Size has got reduced from 320Gb to 160GB. What Should I do.
Please Help me out i have been searching this problem since last week.

Thanks in Advance
Rehan

8 replies

by amirza

Go to the Dell Support Site and see if they have an update for the BIOS and Chipset Drivers for Windows 2000.

Let me know if you need any additional help.

P.S. I was born in Karachi, but have been back in 23 years!

by quaint_data

W2K only support 137 GB hard drive unless you have modified the bios.
Extract:
Operating systems that do not have 48-bit LBA support enabled by default (such as Microsoft Windows 98, Microsoft Windows Millennium Edition (Me), or Windows 2000) that are installed on a partition that spans beyond the 28-bit LBA boundary (137GB) will experience data corruption or data loss.
Source
Hard Drive Size Barriers, In Depth
http://www.dewassoc.com/kbase/hard_drives/hard_drive_size_barriers.htm
and this
1 - 48 bit Bios Support
http://www.largeharddrivesupport.windowsreinstall.com/win2k.htm

Good Luck

by 1bn0

What does Disk Manager show?

Refer to this article if you do not know how to use Disk Manager.

http://www.theeldergeek.com/disk_management.htm

Does it show a 320 GB drive with a 160GB partition and 160 GB of "Unallocated" space?

Or two seperate 160 GB partitions.

Or does it just show a 160GB Drive?

by cholan41

Chk HDD GB limitation Jumper ,connect to other o/s(x/P) as a slave thn chk .goto disk management and chk sometime . i hv same problem for my backup server this way i found a solution

by rehan_hussain1

before that i installed windows Xp it was running fine and it shows 320GB but when i install windows 2000 Professional the size has reduced from 320 to 160Gb. so i don;t think Bios need to be updated.

by 1bn0

but, I take your answer to be it shows a "160 GB partition on a 160GB disk".
The disk is the actual physical hard drive.
The partition is a logical division of the disk that allows the partition to be formatted and displayed in windows with an associated drive letter. A disk can be one or more partitions. A partition can occupy some or all of the disk. If a partition occupies oly part of the disk and is the only partition on the disk, the rest of the disk will be labelled "unallocated"

The basic question I was attempting to ask is" Does disk manager see the whole 320GB disk but only a 160GB partition or does it only see a 160gb disk an therefore only creates a 160gb partition occupying 100% of the 160GB disk.

Sorry to be long winded but sometimes asking the right questions will lead to looking in the right direction for the answer.

This discussion is closed to new replies.