Discussion Locked

3Com OfficeConnect ISDN Lan Modem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A remote user has been upgraded from a 3Com ImpactIQ ISDN modem to the 3Com OfficeConnectISDN LAN Modem. The LAN modem can connect to the network, but it can't access resources. I can't get drives to map, or the remote computer to access the email server. Any thoughts on what is going on here?

5 replies

by nichomach

The ISDN LAN Modem's primary (designed) role is (so far as I am aware) an internet access (therefore IP) router. If it's connecting, but none of the remote network is visible, how are you assigning your IP addresses, please? Are you switching froma direct dial-in mode, where the user connects via a dial-up connection, to an indirect mode where the LAN Modem handles the dialling? If so, how are you handling routing between (effectively) the two networks? Bear in mind that they'll need to beon different network addresses, with routes defined AT BOTH ENDS in order to communicate. Can you ping the servers in question by IP address? More detail please?

by globalsalsa

I have a similar problem and have been directed to:

http://support.3com.com/infodeli/tools/remote/lanmodem/3c892/3c892faq.html

Details of my dilemma OCLM site A to OCLM site B problem being able to
see/ping beyond OCLM site B.
Both sites have been setup as document Office Connect - How to connect an
OCLM to another OCLM.

FYI Site A is however able to connect to and ping/see other side of network
site C (an unrelated client network)

When pinging the cisco switch 192.168.0.28 fromsite A = reply from
192.168.1.1 : TTL expired in transit
is the response.

Site A
Workstation W98
IP asigned by DHCP on OCLM
subnet mask asigned by DHCP on OCLM

OCLM
IP 192.168.1.1
subnet 255.255.255.0
DNS 192.168.1.1

Site B
OCLMIP 192.168.0.100
subnet 255.255.255.0
DNS 192.168.0.100

Cisco Switch
IP 192.168.0.28
subnet 255.255.255.0

Workstation W98
IP asigned by DHCP on NT server
subnet mask asigned by DHCP on NT server

Site C
OCLM
IP 10.0.0.1
subnet 255.255.255.0

Workstation W98
IP asigned by DHCP on OCLM
subnet mask asigned by DHCP on OCLM
eg 10.0.0.15
255.255.255.0

Any ideas would be welcome

This discussion is closed to new replies.