Discussion Locked

60 Gb disk not formating in win2k fat32

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am reinstalling a machine with 2 x 60 Gb disks with win2k SP1. The first partition is 8 Go NTFS, with the system : no problem. But when I try to format the 52 Gb partition in fat32, I get an error, around 94%, and a refusal. It allows me only to format a 32 Gb partition fat32 or use NTFS. Is there a work around to this limitation ?

5 replies

by timwalsh

The Format tool in Win2K will NOT create a partition larger than 32 GB even though the files sytem will mount and support larger partitions (up to 2 TB). This is by design. See the MS KB article "Limitations of FAT32 File System" (Q184006)

The only way around this limitation is to use the drive setup software includded with various manufacturer's drives (such as the MaxBlast Plus II utility provided by Maxtor). However, these utilities usually only work with drives from the manufacturer that provides the utility.

Your best bet is to use NTFS unless you have a overriding reason to use FAT32.

by mr peters

answer 1 is correct, but there is "workaround". get yourself a Win98 bootdisk, boot it from the floppy, create the partition using FDISK and format it Fat32 from DOS. Formatting a 52Gb partition will take a VERY long time.

This discussion is closed to new replies.