Discussion Locked

Auto shutdown on loss of power.

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I know that Windows 2000 Server does interface with an uniterruptible power supply (UPS) through the power management option of the control panel. Query: Does that option include auto shutdown on power loss or do I need a third party solution?

10 replies

by doubledown

That probably depends on the UPS that you buy. I'm sure many are compatible with 2000 out of the box including the autoshutdown feature. You can confirm that with the manufacturer of the UPS.

by fenaikh

Hi

PowerChute is your software We are using it with netware is more than excelent.

Good luck

Mohamed

http://www.apcc.com/products/management/pc_networkshutdown.cfm

General Information

Current Version

PowerChute network shutdown v2.0.

Hardware Requirements

UPS Model APC Smart-UPS, Matrix-UPS, Symmetra Power Array, and Silcon.

Network Card APC Web/SNMP Management Card for 10 BT Ethernet, AP9606

Communication Over the network on a Ethernet Network

Software Requirements

Server Operating System Novell Netware 5.0, Windows NT 4.0, Windows 2000, Solaris 2.6 - 2.7, IBM AIX 4.3-4.3.2, HP-UX 10.20 and 11.00, Red Hat Linux 5.2, 6.0, and 6.1

Client software Netscape Navigator v4.05 and newer
Microsoft Internet Explorer v4.0 and newer

This discussion is closed to new replies.