Discussion Locked

best motherboard for gaming?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
what would be the best motherboard/processor/power,supply to get if you were going to make a kick butt gaming box?

3 replies

by thechas

Before you select a motherboard, you need to define some other hardware first.

Specifically, CPU and video card.

If you are going to go with an Athlon CPU and nVidia based video card, then you want to go with one of the boards with the nVidia chip-set.

For maximum gaming performance, forgo ANY thing built in.
No on-board sound, modem, or NIC.

As to the power supply, Get the biggest one you can afford. 500 Watts minimum.

For maximum performance, forget about the visual wiz-bangs.
No lights, no clear panels.

Don't forget to include lots of cooling fans.
Set up the fans for cross air flow, and have 10% more CFM in than out.

Chas

by victormjr

as far as the hardware: linksys 10/100 etherfast nic; nvida g-force graphics card 64 meg (going to upgrade that to 128 meg),herculles sound card 64 meg.im sticking with the amd chips and nvidia graphics card. power supply i have a 300 watt now buti will upgrade that to.

by clbizzaro

nforce2 chipset.

i currently use an asus a7n8x dlx rev2 paired with an amd2600 333fsb and a ati9600 with 512 mb corsair ram for my gaming rig. i run the cpu and vid card slightly o/c'd ( default being 2088mhz on the amd 2600 ) with just some extra air cooling. stable and fast.

my 3d mark scores are pretty damn good with this set up and i can turn all the goodies on ( aa,af ect.. ) with just a minimal fps and cpu hit.

its only my opinion, but im happy with it.

now as for what i wouldget when i can afford an opteron, if i choose the 64 bit route, or the 3gig intel with quad pumped fsb ( 1gig , yes please! ), i couldnt tell you as of yet.

from what i understand, and from what i have seen while playing the doom 3 beta, my current config is more than adequate to handle the next gen gaming engines.

oh, and stay away from the bartons if your an overclocker, i had a 3000, which died a sudden and heroic death, while shouldering a load no cpu should have to think about. theres just no headroom left in that architecture imo.

btw, i found that asus tech support is a joy and all chipset drivers and bios updates have been bug free and, without exception have benifited my hardware.

This discussion is closed to new replies.