Discussion Locked

Blue screen of death

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My server gave a sign of Power Supply failure ( I checked at the power supply icon which was blinking in red colour)
I restarted the server. Somehow, the server gave a BSOD.
I tried to restart the server several times but it still give the same message.
Is it due to the power supply failure or is it a software error?

5 replies

by uji

Forgot to this this one....
it gave an error code as below -
0x0000000A IRQL_NOT_LESS_OR_EQUAL
I search the web site and found out the possible cause -

An attempt was made to access pageable memory at a process internal request level (IRQL) that was too high. A process can only access objects that have priorities (IRQL) of equal or lower priority than its own. This is usually caused by a device driver using improper addresses

Is there a way to solve this? I have restarted the serverseveral times but to no avail.

by nomac

You are receiving this error because you are experienceing a device conflict at the hardware level before the operating system even starts.

Try to start from last known good configuration, or try going into your BIOS and moving devices around.

by rabbit_runner

The 'last known good configuration' will not work becuase you have already tried to reboot more than once. In your question, you mentioned that the initial problem started when the power supply failed. Try removing the power supply from the serverand reboot. If that does not work, you may need to get the cd program which will allow you to boot to the cd, then disable different services or devices, until the server can be brough back up. If you have additional questions, let me know.

by uji

thanks..I select Last Known Good Configuration and it is ok back. But I haven't restart the server again yet. I wonder, I search for the info and it is maybe due to the device driver that I installed. I did not install any driver for a long time...but thanks for your help.

This discussion is closed to new replies.