Software
by tech_wiz03
How do you mean it works till it hooked up. If your talking self test, yes that will work. If the head is shot however it will self test fine and then go into unpredictable behaviour when connected to the pc. If this is your case replace the head or the printer since the head is almost full price of printer.
If when connecting the printer to the pc it isn't going thruough alot of cycling and chatter but just doesn't print when told to, make sure you have installed the bjc2000 drivers. this printer requires the correct win drivers for the op system because since the print control is pc based and not actually inside the printer.
hope this helps
rick
This discussion is closed to new replies.
Sort by Trending