General discussion

Locked

can't browse or ping network with vpn

By Eminent87 ·
I have configured RAS in windows 2000 server and clients can VPN in fine if they are using windows 2000 but if it's 98 or xp they can't seem to see the network. They can connect just fine but when trying to ping or browse for the network, it can't see anything. I can't even use the net view //samplecomputer/c$ either. Does anybody have any idea as to what is going on? All the 2000 clients can connect, browse and ping just fine.

I've noticed something when I checked the network setting, eventhough netbios over tcp/ip is enable it comes up disable when I do IPCONFIG /ALL. All other settings are the same as the 2000 clients. I've unchecked the "use default gateway" and enable wins and dns.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

can't browse or ping network with vpn

by quintar51 In reply to can't browse or ping netw ...

If your zones are set to allow dynamic updates, then there's your problem. Only win2000 clients can update the zones automatically. Any older clients, such as Win NT, 9x, must have DHCP update the records for them.

Install and configure a DHCP server, and by default, it will update the DNS zones for older clients. Also, in your RAS configuration, allow RAS to obtain IP addresses from your DHCP.

good luck,

Collapse -

can't browse or ping network with vpn

by Eminent87 In reply to can't browse or ping netw ...

Poster rated this answer

Collapse -

can't browse or ping network with vpn

by Eminent87 In reply to can't browse or ping netw ...

This question was closed by the author

Back to Windows Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums