Storage

Ask something
Question Locked

Can't Install Toshiba

0 helpful
6 replies

by jama yassin

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I reformatted toshiba, and i tried to install again but when installation begin every time there is missing DLL files, i tried other CD but same problem comes back. i thought its Hard Disk and i Changed it, but the problem still continue.

Please Help me.

sorry for my poor enlgish

6 replies

by oh smeg

Reduce this unit to 1 Stick of RAM and load the computer. Once it is fully loaded replace the second stick of RAM and it will work.

This Mismatched RAM caused files to fail to be read when you are attempting to install Windows but doesn't produce problems at other times.

As always after changing the amount of RAM in any computer open the BIOS make sure that the Changed Amount is correctly seen by the BIOS and save the changes when you exit the BIOS.

Col

by jama yassin

I have tried all that solution, but it didn't work.
in the process of trying that ideas i have found other solution, I removed the HDD and connected to other Toshiba with same driver. I installed and reconnect the previous one, it worked but there still a problem, after 30 minutes, it shows the BlueScreen and restarting.

Help Me.

Thank You

by banderas.c

You must have reformatted the partition which includes systems 32, so the dll files are gone,there is not related to the physical hard disk. You should reinstall the system or recover the system files with some recovery software, here I suggest you a free one http://free-backup.info/data-recovery-software.htm
if you don't know how to handle it, you could take this for reference,
http://www.easeus.com/resource/recover-data-after-format.htm
good luck to you.

by murugadoss.myld

first u check data cable in cd-rom or cd-rom drive or cd (any other cd-rom drive or new cd install to try)

This discussion is closed to new replies.