Software

Ask something
Discussion Locked

cd label using corel draw

0 helpful
1 reply

by may_day

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

does anyone know how to create a cd label using corel draw? can you give some tips in creating cd label using corel draw.

many thanks

1 reply

by alpha-male

If you are familiar with Corel, it should be no problem at all. Most labelers come with templates you can use (look for .cdr or .eps versions). If you don't have one, then download one from the web (a lot easier than making it from scratch).

Take a look here:

http://www.datadisc.com/graphics/win_corel.html

Once you get a template, just use Corel like you would for any other graphics project. Enter your text and graphics, place images, etc. Working from the template will help so you can print the label properly on the adhesive lables.

If you need help with operating corel itself, I would strongly recommend hitting the local Barnes and Noble or B. Dalton and finding a good guide.

Good luck....hope this helps!

This discussion is closed to new replies.