IT Employment
I am trying to connect these two networks via route command but it wont work. I just want them to have communication, class a link to class c.
Your help is very much appreciated.
I am running out of time.
by ferocious
A trust relationship needs to be set up if you want to access information on the other network, or vice versa. It can be one-way or two-way.
Not to be mean, but a lot more info needs to be provided on your part, such as what are you needing toaccomplish, what Network OS are you using, are you the only one involved in the project, etc.?
by ronypp
Hi!!
I don't know whether you have been successful in connecting the two different networks. I am preparing myself for the CCNA Exam. I have made a small network design with two PCs which are in two different networks connected by a 2500 series router (2 ethernet interface and 2 serial interface.).
The mail bounced back. If you can send me your correct address I shall send you the network diagram. I was able to ping from both the PCs. As I said, I am just a beginner in routers.
Router
------
E0: Class A Address
E1: Class C Address
Regards
Rony
This discussion is closed to new replies.
Sort by Trending