10 replies
by gigelul
Hi,
If I understand correct your issue (you can't logon because the time restrictions), you must check in User Manager, your account - hours.
Or post comments with more details.
by mindwave1
by ann777
Service Pack 3 on Windows 2000 is supposed to resolve this issue. Have you installed any service pack?
You can also look at the following articles (pls remove any embedded spaces before the article number):
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q243883
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q321290
This (below), may be the article that you are thi8nking about:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q146092
by mindwave1
by acattr
On your domain controller from a command prompt run "net time /setsntp:time.windows.com"
This will sync your domain controllers time with this time server on the internet. once you do that all workstations will sync thier times with the domain controller. To force it, you can logon locally on the workstation and do a "net time /setsntp:domaincontroller"
by mindwave1
by chris
From reading your question, it appears you want to allow a greater time difference in your network - rather then fix the issue with the client that has been off a couple times.
The time sync is key to a number of security things, and I wouldn'tmake the time difference greater - but would focus on why that client keeps losing it's time. Normally the time service works, but on some machines you may need to sync the time more frequently because they lose/gain time so quickly. I would address that issue before making domain wide changes. Take a look at the first technote mentioned below, and focus in on the PERIOD registry value. This value has helped with two machines that were having the same error you mentioned.
Just my 0.02? - Good luck.
There is two technotes that you should read:
Solution to your problem is in here:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q223184
Additional background time information here:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224799
by mindwave1
by mindwave1
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending