General discussion

Locked

Conflict on Ports (IRQ)

By tsoumelli ·
I installed win xp at a new Am2 system with MSI K9neo-f And after i Install the drivers of Motherboard it says in the device manager that the secondary IDE channel(K9neo-F has Only one IDE Channel) and the Networking adapter(The one that is in the Motherboard) has a conflict on IRQS (The IDE Channel has 13 IRQ i think). And that i must Close the one of these two devices.
so I cant use my Network adapter.

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

strange that the IDE controller would conflict

by CG IT In reply to Conflict on Ports (IRQ)

I'd see if there was a BIOS flash that might solve the problem.

IRQ 14 and 15 are supposed to be for the IDE controllers.

IRQ 13 is math co processor [and that can't be changed

IRQ 12 is the PS/2 mouse [which is probably why all the mfgs are going to USB to free up IRQs]

9,10 11 are usually open IRQs.

not going to go through the list. It's all available on the web.

Collapse -

Conflict on Ports (IRQ)

by tsoumelli In reply to strange that the IDE cont ...

Well my mistake i meant IRQ 15 not 13.the only thing to do is to disable the Network adapter, cause the second IDE channel cannot be disabled(There isnt Second IDE in my Mainboard)

Back to Software Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums