General discussion

Locked

connect 2 different IP in the same network

By Oil78 ·
I have a problem...How to connect 2 network with different location and different IP class ? for example location A is using 202.x.x.x and location B is using 200.x.x.x... Please advise. coz we are trying to set up a monitoring system for 200.x.x.x from 202.x.x.x. TQ

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

sorry wrong title It Should be "connect 2 diff IP from 2 diff network"

by Oil78 In reply to connect 2 different IP in ...

It Should be connect 2 diff IP from 2 diff network

Collapse -

Use a router

by jackster@oz In reply to sorry wrong title It Shou ...

It all depends on how much money you want to spend but a simple solution would be to use a router which has sveral ethernet interfaces. One interface could have your 202.xxx subnet range, the other can have your 200.xxx range. That way you get your 2 networks talking to each other. Or you use a PC with 2 network cards in it as a gateway (Like a router). Each card is configured with the 2 IP address ranges.

Collapse -

Spare machine with 2 Ethernet cards

by pricepd In reply to connect 2 different IP in ...

You can do this with Win2K on a machine with 2 ethernet cards. Assign the 200.xxx to 1 card and the 202.xxx to the other card and use Win2K routing (Routing and Remote access must be installed) to set the routes. You will also need to add an entry to each of your default gateway's tables (on each subnet) to route the specified traffic to this machine.

Back to IT Employment Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums