Connect one NB to the Router and either use the Setup CD that comes with the Router or open your Web Browser and type in the HTTP Address for the Router that is listed in the Instruction Manual.
Setup the Router as per the Instruction Manual and enable whatever Security is built into it at the very least this should be SSID or better WPA or WPA2. Write down the Key that you have made up and then save your Changes to the Router on Exit. As the Router uses the 801 WiFi system you don't need the Blue Tooth to setup a Internal Network. Also change the Default Password of the Router to prevent anyone else logging into it and changing the settings.
Then open one of your NB's and run the WiFi Setup Wizard and enter the Key for whatever Security protocol that you have enabled when requested. At the same time you need to run the Network Setup Wizard and enable File & Printer Sharing so that you can access the printer from Both NB's and share files between the NB's.
Connect the printer to the NB that it is going to be used mainly on and install the Drivers. Then share the Printer by right clicking on it and select the Share Option in the Drop Down Menu. Follow the directions here till the printer is shared.
Open the second NB and start the WiFi Setup Wizard and enter the Security Key that you have made so that this NB can Wirelessly access the Network. Run the Network Setup Wizard and enable File & Printer Sharing. When you can see the other NB through the WiFi Network install the Lexmark Printer to the second NB and tell that NB that the Printer is a Network Share not a Local Printer. When you have finished installing the Printer Driver print a test page.
You shouldn't bother trying to install the FAX or Scanner Drivers to the second NB as the WiFi Network will not support the Bandwidth necessary to scan in with the other NB on this Multifunction Device so only install the Printer Drivers not any of the rest of the ones that come with the Lexmark. If necessary you can transfer scanned Images to the second Computer via the Network but not by scanning them into the second NB Directly. Anyway depending on the Multifunction Device the Scanning & Faxing over a Network probably isn't supported the Instruction book for the Lexmark should tell you what is required here but WiFi Networks are not Fast enough to transfer Large Files on a regular Basis. Particularly Files like Scanned Images that require 2 way communication between the different devices.
I hope that is of use to you.
Col