Question Locked

Connecting a MPC 4000 RICOH to a network

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Howdy all, first post..and first question.

Im working in an office with a RICOH MPC 4000 office printer/scanner/fax machine. Tis a beast of a machine.

i need to connect this up to our network of machines. Its connected to our ethernet but thats as far as i can go.

Is it possible to share it through one machine to all the others in the network? and if so how..

3 replies

by kenone

Load the drivers on one machine and share the printer. Do all your initial config stuff on that machine. The other machines will see the printer shared under the main machine name under entire network. They will most probably need to load drivers too. Your main machine becomes your de facto print server so, if that machine is not on the printer will not be available. Did you give it a fixed IP address?

This discussion is closed to new replies.