Discussion Locked

Connecting to a Domain over a Router

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi there,
I have a problem and need some help.
I am trying to connect two offices with a leased line and have routers on them.
Network 1 has the domain server and the IP group 10.0.100.x with the router on 10.0.100.2 and server 10.0.100.1 at the other side the IP group is 10.0.200.x with the router as 10.0.200.2. There is no domain server on Network 2.
I am running WINS on the domain server so I have the records of the computers in Network 2 listed. Each Network has the default gateway as their respective routers.
I am able to ping the server across the routers and vice versa but I am not able to log in as I receive the error message "No Domain server available" When I use find computer in windows 98, I am able to view files on the server and other workstations.

Any idea what I am doing wrong ????
Please help.

9 replies

by highorbit

This is not all that hard. It's a WINS issue, you don't need to have an LM Hosts file as above, which has higher overheads!

The second domain must use the primary domains WINS server, or each domain must have WINS servers with Push/Pull replication between them. If this replication isn't working the you can put static entries on the WINS server that can handle this.

On the domain that is producing no domain server is available type: nbtstat -a

This will retrieve the entries from the WINS server. There must be entries for the remote domain and for the PDC itself. I can't remember exactly but you need a 1B, 1C and 00 entry for it to work.

If NBTSTAT doesn't work then the WINS server is uncontactable.

As one of the other guys wrote it is important that the routers are configured to allow this.

If you would like any further information then please e-mail me on Chris@high-orbit.com

by nettek

You don't say whether or not you have done this, buy on your clients in Network 2, you must have the WINs server address listed under the properties of network neighborhood.

This discussion is closed to new replies.