Discussion Locked

Connecting W2k Pro clients to NT Serv 4

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please someone, write to me about W2k Pro
client PC's authenticating to, and joining, NT
Server 4.0 domains. I can't get the W2k PC's to
fully qualify with the NT server, nor connect to
printers or shares by any other means than
entering the NT server's UNC address at the
W2k Run line. What's the trick?
Should I throw in the towel and make life
easier by replacing W2k Pro with Win 98?
Thank you!

3 replies

by joseph moore

The best way I have found to take care of the authentication problems that seem to exist between a NT4 domain and Win2K/XP clients is to modify the LMHOSTS file.
Put in the file the definition for your PDC and for your domain.
For example, say your PDC is called \\SERVERPDC and it has an IP address of 10.1.1.1, and your domain is called MYDOMAIN. Your LMHOSTS definitions would look like this:

10.1.1.1 SERVERPDC #PRE #DOM:MYDOMAIN
10.1.1.51 "MYDOMAIN \0x1b" #PRE

Put these in the LMHOSTS file of every 2K client you have, then reboot your 2K clients. They should now be able to authenticate to your NT4 PDC.

Here is a Technet article Q180094 on LMHOSTS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q180094
(pleaseremove any spaces)

hope this helps

This discussion is closed to new replies.