Discussion Locked

Cracking sounds with Toshiba 8100-Win2K

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Toshiba 8100 labtop with Windows 2000. Every time I play music, movie... there are cracking noises every few seconds. Does anyone knows what the cause is and how to correct it? Thanks.

6 replies

by carnesm

This may or may not help, but I had this problem with my home PC (with an old SB16). I actually replaced my sound card, since I was in need of a new one anyway, but you might try updating your card's drivers.

Hope that gets you somewhere.

by timwalsh

Please be a little more specific.

Is this noise coming from your laptop's speakers, from the hard drive, from the cooling fan?

If it's coming from the speakers, do you get the same noise if you plug in a set of headphones?

by thuong.luu

It comes from both my labtop speakers and headphones. The intersting point here is it also happened to another Toshiba labtop I used before this labtop. So I am thinking it must have something to do with drivers.

by crapaud ergo sum

I assume that it did not do this before some point? Assuming this had you changed added anything software hardware or peripheral wise even if short term?

Of the model you speak of it could be a PII-600mhz to a PIII-850mhz (I think), so I was unable to confirm hardware information. Even so, the driver for audio is only one of many drivers that should be updated. Then perform all maintenance and see what happens. At times having only updated one or a few drivers, I have had this happen.

One other question, have you trying ?line out? for audio (if available), to an amplified device? All that is needed is an eighth inch stereo to RCA cable.

Best of luck

by thuong.luu

Thanks for the response,

I got this labtop (850Mhz) with Windows 2000 freshly installed. The cracking sounds happened as soon as I tried some music on. I updated the sound drivers with Toshiba's and the problem still there. What other drivers should I try to update?

Thanks again,

This discussion is closed to new replies.