Community archive

Ask something
Discussion Locked

DB15 Wire configurations Help???

0 helpful
2 replies

by slr25

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can anyone give me a copy of pin configurations of db15 monitor. I have searched the net but didnt see anything that would help me.. What I need is the wire confirations of monitor, not the pin. I need to solder the wire of my old monitor in a new connector case but dont know teh configurations of the pin .. Please help...

2 replies

by pgm554

The signal connector is a subminiature 15 pin D-shell connection.

Pin Signal Pin Signal

1 Red 9 N/C
2 Green 10 Digital GND
3 Blue 11 Digital GND
4 Digital GND 12 N/C
5 Self Raster 13 H-Sync
6 Red Return 14 V-Sync
7 Green Return 15 Digital GND
8 Blue Return

by jackofalltech

VGA (15)
VGA=Video Graphics Adapter or Video Graphics Array.
Videotype: Analogue.

(At the videocard)
(At the monitor cable)

15 PIN HIGHDENSITY D-SUB FEMALE at the videocard.
15 PIN HIGHDENSITY D-SUB MALE at the monitor cable.

Pin Name Dir Description
1 RED Red Video (75 ohm, 0.7 V p-p)
2 GREEN Green Video (75 ohm, 0.7 V p-p)
3 BLUE Blue Video (75 ohm, 0.7 V p-p)
4 ID2 Monitor ID Bit 2
5 GND Ground
6 RGND Red Ground
7 GGND Green Ground
8 BGND Blue Ground
9 KEY - Key (No pin)
10 SGND Sync Ground
11 ID0 Monitor ID Bit 0
12 ID1 or SDA Monitor ID Bit 1
13 HSYNC or CSYNC Horizontal Sync (or Composite Sync)
14 VSYNC Vertical Sync
15 ID3 or SCL Monitor ID Bit 3

Note: Direction is Computer relative Monitor.
Contributor: Joakim ?gren
Source: ?
Please send any comments to Joakim ?gren.

This discussion is closed to new replies.