Discussion Locked

Deleting a resorecting removed nic card

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having the following issues with a Windows 98SE workstation.

A nic card (D-LinK DFE) that is physically removed from the computer and removed from network neighbhood. This card want to still install itself on start up.

I have installed a SMC 1244tx nic card. Install a static IP address, DNC IP, and gateway IP. The system will not recognise this nic card.

I go to start, run type winipcfg and the system tells me it can not find IP file.

Can someone please help me with this issue.

Dennis Ellis
West Pike School District #2
Kinderhook Illinosi

3 replies

by thechas

Have you checked add/remove programs for d-link software?

To clear the driver issue, the simplest thing would be to re-insert the D-link card, boot up, remove the card form device manager and shut down.
Physically remove the card, and boot again.
Then shut down and install the new card.

If you still have errors, you will need to search the system files, (autoexec, config, win.ini, sys.ini)(msconfig, or sysedit commands form the run box) and registry for references to the d-link card.Remember to back up the registry first.

I would even go so far as to remove related files from the Windows folders. Start with the .inf file for the d-link card.

This discussion is closed to new replies.