Community archive

Ask something
Discussion Locked

DHCP & ADRESSES IN NT4.0

0 helpful
1 reply

by ώ.ữ.ẃ.ϫ.м.ς ® ,

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a 200 node network with running win98 SE and NT4.o on server.Somtimes about 40% of wkstns just freeze up when trying to open zippfiles from the server.The rest work normally sometimes 3 systems on the same switch doest work but the rest sharing the same switch works fine.The dhcp registers bad addresses in the dhcp manager( I use static adresses).How do you resolve the dhcp managers bad adress and why does the freeze happen?

1 reply

by lmorgan

Is your switch managable if so then shutdown the PC,s and clear the arp cache on your routers switches and hubs. Also check the port speed on switch I had a simular issue except my DHCP was duplicating IP's but I did have the lockup situation. Good Luck

This discussion is closed to new replies.