Discussion Locked

DNS/WINS/DHCP in NT environment

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win NT based network comprising of 3 Win NT servers and a Win 2000
server. Its a flat network without any routers. Both the PDC and BDC are Win
NT servers. We have about 70 Win 2000 and Win 98 workstations. I am
interested in configuringa WINS/DNS/DHCP server into the network.
Currently, none of these services are running on the network. Is it possible
to bring in a Win 2000 server and configurte it with these services? Is it a
good idea to configure these services on Win 2000 instead of Win NT? Is
running these three services on one server, OK? What would the pro's and
con's be for running these services on Win 2000 compared to running them on
Win NT?

Thanks for the help!

5 replies

by legj1

I wiuld say you would be alright running all of these services on a 2000 box...especially if it has a few horses behind it. Pro: It is a good idea not to run these services on your DC's. Cons: Eventually, you may want to think about upgrading toa WIn2000 domain. There are many advantages that come with 2000 that cannot be utilized un an NT domain. However, for right now, I would do exactly as you are inquiring. Setup the 2000 box as a member server and setup DNS, WINS and DHCP. Obviously, you will need some good fault tolerance on this box...with three major services running on a single server. We, personally, have a 2000 box that runs all of these services...and is a DC and Exchange Server for 30 clients. I would go for it!

by faisalmasood

Yes you can run these services on W2k server.

AS for as W2k & NT4 comparison is concerned W2k is preferable. Since in W2k DNS you have the option of Dynamic DNS. Plus it works smoothly with wins, DHCP.

In case of NT you have to do a lot of work. But in case of W2k you have to just configure it & sit back... Im running these 3 services on one w2k Pc.

This discussion is closed to new replies.