Discussion Locked

Downloading drivers for graphics card

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Please keep your advices easy to understand as I don't profess to know anything about the innards of my comp. Recently all my graphics are all fuzzy and shot to pieces. (sorry that's as technical as it gets) I phoned PC World's tech. dept. and wastold I need to download new drivers for graphics card, and that 3.5 megabyte should suffice. Well downloads.com could only offer about 1.5mb. So I tried that, but it made no difference at all. What else can I try? Please help!

4 replies

by ann777

Why do you need new drivers? Did something software-wise recently change? If not, then I'd suggest that you begin looking for another cause for this problem.

The most probable cause of your monitor displaying fuzzy text and graphics is that your monitor is aging and needs to either be repaired or replaced. The graphics card generally does not need new drivers unless you recently installed a new OS.

If all that has happened is that your images are getting worse, then look at taking the monitor to a repair shop and having them connect it to one of their computers to test it. If the display is fuzzy there too, then it is the monitor. Either purchase a new monitor or repair the old.

If the monitor works fine on another computer, then look to the graphics card as going bad. But probably, new drivers are not going to fix it.

by thechas

I agree with Anna, that your monitor is more apt to be the root of "fuzzy" images.

Depending on the monitor, there are controls or a menu system to adjust the monitor.
Give these a try before you try anything else.
Just adjust one setting at a time for the best picture.

As to the drivers.
Start by downloading and running the system information tool from either of these sites;
www.belarc.com Belarc Advisor
www.sisoft.com Sandra

Either tool will give you a good profile of your system.

If you decide to download drivers, I recommend the web site of the company that made your video card and motherboard.
These drivers should have been tested and verified with the actual hardware.
Alternately, I use the chipset manufactures drivers.

As to the size of the file, the tech you spoke with was estimating the file size.
I would just verify that you got the correct file for the card, and your version of Windows.

The monitor driver could make a difference also.
Check that Windows has identified your monitor properly.

Right click on any open space on the desktop.
Select properties.
Click on the settings tab.
Click the advanced button.
Click the monitor tab.
Make sure that the selected monitor matches themonitor you are using.
If not, look through the list of mfg and models to find your monitor.
If you monitor is not listed, use the standard VGA that come closest to your monitor.
Apply the settings.

If your monitor was not in the list, download the driver from the monitor manufactures web site, and install it.

Chas

by rev. ned

Before you spend any money, at a repair shop, try deguassing your monitor. Degauss is the process of demagnitizing, there should be a button on the front of the monitor, or undernieth the front edge, or possibly on the back, but it will be labled as"degauss". After a while, the magnitizem in the CRT [cathode ray tube] builds to a point that it will distort, or fuzz, your display, so it needs to be Degaussed. If you have a newer unit this does not apply because it does it by it's self on start up and is not equipped with the said button. If yours is equipped with a degauss button, don't be shocked by the sudden buzz twang type sound, and the twisting of the display, this is normal. Have fun!

This discussion is closed to new replies.