General discussion

Locked

Experiencing a problem with MPLS (printing)

By ahmedkara1 ·
We are currently implementing a VPN (MPLS) solution for a client and experiencing problems. On the sites that have been cut-over to MPLS, those branches are experiencing major printing problems. Packets of data are being loss (small amounts eg, +- 10 in a 1000) and stalling printers. The company uses an online system, Kerridge, and with the printers stalling, the customer cannot trade.
Bandwidth usage on the lines is only +- 30%.
Any suggestions, advice on things to check or comments please? Much appreciated.

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Experiencing a problem with MPLS (printing)

by ghnatiw In reply to Experiencing a problem wi ...

We experienced the same problem when we were in the testing phase of our cut-overs. Our Telcom vendor had to put hardcoded routes in the router and I had to HP printers with the JetDirect cards in them so i was able to use the Access control on the JetDirect cards to limit what networks could use that printer.

Back to Software Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums