i built this system for a friend son
i have a amd 4000 x2 64 bit cpu ,nc61s-L with Nvdia chipset mcp61 and onboard graphics.
when i put in the x700 pci-e card the screen stays blank so i turn it off pull out the card restart on onboard vid it then restarts ok and comes up with found new hardware pci ? nothing is in the pci or pci slots so it comes up with a conflict in device manager . looked in bios settings pci-e is selected as first boot but nothing happens
i read the other posts and have checked power req and thats only 300w im running 350 any ideas thanks steve
