Discussion Locked

HOW DO I HAVE MLTPL. NICS on an NT4 Box

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running an NT 4.0 Server and it is used for file/print sharing. We do not run DHCP or WINS and have assigned IP addresses. I need to increase the number NICs to make the retrieval process more effecient. how do i go about doing this and config them?

Thank you,
David D.

3 replies

by parbo

Well first you need to make sure you have some ip addresses available on your network.
You physically install the cards and boot the system. Next go to network properties/adapter tab and install the drivers. Make sure you specify the tcp/ip information for the NICs. Now you also have to make sure that the nics are on the same network ID so it will be easier to access the objects. so if the mask for the first nic is 255.255.255.0 make sure its the same for all others and the ip address is in the range.
Hope this helps.

This discussion is closed to new replies.