Software

Ask something
Question Locked

how to crack xp admin password

0 helpful
15 replies

by tomhangs

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
plz help .... its urgent

15 replies

by oh smeg

The members of TechRepublic - A Resource for IT Professionals, will not assist anyone in the recovery of lost passwords. You may have a legitimate reason to recover a password. However, we cannot verify your motives and will therefore not assist anyone in what may be an attempt at gaining unauthorized access to a computer system. Due to the open nature of this forum, any assistance given to help circumvent security measures, even for legitimate purposes, would be available for unscrupulous individuals to use for illegitimate purposes. This is a risk that we the members of TechRepublic will not take. Please do not ask questions of this nature on TechRepublic.

If you have a legitimate need to circumvent a password scheme, please contact the vendor for the software / hardware and request their assistance. E.g. Windows XP password recovery issues should be taken up with Microsoft's technical support, Phoenix BIOS password recovery issues should be taken up with Phoenix Technologies, etc.. To those viewing this post: Please DO NOT respond any further to this thread.

This template has been released under the GNU public license and you are encouraged to use it as a standard reply for questions of similar nature, provided that you make any modifications available to other users.

[b]Here[/b] you need to speak the the Software Maker and get their help.

by c f usa

You could go to your Administrator, or you could contact Microsoft, or you could even possibly take it to a local Computer Repair facility where you could prove ownership.

If it is indeed a urgent matter, I would hesitate to tell you simply hold your breath until you get a answer you can use
here. Mainly because you might be willing to do it

Good day

by robo_dev

I have a Makita 1/2" plunge router with a router table and a full array of carbide tips.

by shasca

Your making me hot. say it again.. Plunge router.....oooooooo

by oh smeg

But I do find it really offensive when [b]SWMBO[/b] walks away laughing her head off when I say that I'll make something out of wood. :(

OK so I'm a Mech Engineer and I love working with metal of any type and I dislike Wood Intensely but that doesn't mean that I can not work with it if required. B-)

Not much of a Wood Working Tool Kit at all though I do have a few items that I use a little bit. My Favorite is a Small Rasp that I can attack wood with whenever I feel the need to destroy something. I've also found that End Mills mounted in a Milling Machine work quite well with wood if you want a router. Though you do have to speed up the Milling Head to the top speed to get clean cuts. The Compound Slide gives you much better control over any Router that you could ever use too. And you can have up to a 6 inches deep cut without any problems. If I needed to go any deeper I would have to get some longer End Mills. :p

Col

by dpalsen

Problem with metal working is that it never turns out with anything but an industrial look. Can't really say I've ever tried woodworking with metal mills, etc. Be kind of fun, but probably wouldn't turn out looking nearly as nice. :)

by seanferd

Not my cuppa. I'm looking for something with a well-lubricated, erm, hole.

by oh smeg

What do you think a Router is? The Idea for them came from End Mills as woodworkers needed to do a similar thing. The only real difference is with Wood you need High Speeds and with Metal you cut with much slower speeds.

I made a couple of Boxes to hold tools things like Harmonic Balance Pullers so there is a Cutout or relief inside the bottom part of the box to hold the individual bits of the puller. I didn't see the need to buy a router to do 1 job so I used the End Mills to perform the cuts. Though I suppose I could have used HSS Drills just as easily. :0

As for what the finished item looks like that all depends on what you are making and how durable it needs to be. I made some Teak Hand Rails for a 75 foot Yacht a while ago and they where exorbitantly expensive with over half the wood ending up on the floor as rubbish. Several years latter I remade them out of Stainless and they are still on the boat 20 years latter doing the job that they where put there for.

OK so if I had of bought the Teak and not worked with what the Boat Owner got cheap it would have lasted a lot longer and if it was my boat I would have keep them coated properly and not allowed them to be exposed to salt water. They did look better but with that particular owner they where not ideal. Can't say that I'm overly fond of the look of the stainless ones on a Cruising Class Yacht but if it was a racer they would have been perfect though maybe a bit heavy. ;\

Col 0:-)

This discussion is closed to new replies.