3 replies
by thechas
1. Back up all data and personal settings (isp, favorites, etc.
2. From add/remove programs, click on the startup disk tab. and create a W98 startup disk.
3. After you are certian that you have every file that you want backed up, boot from the startup floppy. (You may need to enter BIOS setup in order to enable the boot from floppy option)
Run fidsk (type fdisk and press the enter key from the command prompt)
Select the option to delete partitions.
Delete all logical drives and partitions.
(If you only have a "C" drive, you will inly have 1 partition.
Exit fdisk, remove the startup floppy, place the XP cd in the drive, reboot.
Make sure that boot from cd rom drive is enabled in BIOS setup.
The XP install should begin automatically.
If your PC will not boot from CD, then you need to download the file from Microsoft that allows you to create the 6-7 floppy XP boot disk set.
Alternately, you could add a second hard drive to the system.
Run the XP install from Windows 98, and setup a dual-boot system.
That way, you can import all of your W98 settings and files into XP.
Chas
by pamela_saw
by pamela_saw
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending