Discussion Locked

How to share modems for outbound calls

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In a small office environment, I have 20 users (W98 & W2K) who need to dial out to service bureaus occasionally during the day. Rather than providing every PC with separate modems and phone lines, I want to install a few modems on the W2K server and share them with the users. The only information I can find on modem sharing is with regard to internet connection sharing. At another site, we used a Shiva LanRover to accomplish this, along with dial in lan access. This is over kill for this project. Anybody have any ideas how I can do this using a few in-expensive modems?

7 replies

by timwalsh

You can still use inexpensive modems. But, you still need some way of tying the modems to the network as a shared resource. You will still need a device such as the LanRover to make the modems look like a single, shared modem. Most information onmodem sharing will relate to sharing a single modem among several users.

There is no way native to Win2K to create a modem pool (which is essentially what the LanRover does).

You obviously still need a dedicated phone line for each modem installed.

by salochin

A product that I have used in the past is Winport by Lansource. This program supports multiple modems and can have an additional program called Faxport installed alongside it if necessary. The software supports modem queueing where, if the modem(s) are in use, the next user can wait for it/them to become available and then automatically connect.

This discussion is closed to new replies.