Discussion Locked

HP 20 Disk Array under NT

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We're recycling an HP Model 20 Storage Array in the hopes of attaching it to an NT box. Any known pitfalls? We see that configuration is done through the serial port, which is clean and simple, and we can handle SCSI, but is there anything else thatmight crop up?

3 replies

by msj

I am currently taking an NT Server class, and I do not see anything else being a problem in you doing this. Just make sure that at the end of your daisy chaining of the scsi drives that you place a terminator on the last drive.

by duncanscott

Sorry, I don;t mean to be harsh, but yes, I know about terminators and whatnot. The issue was more RAID and that sort of thing, and why HP doesn't want to discuss this configuration.

In the event, it went smoothly enough. That serial port / TTY interface, so typically *nix (if it can't be done with a VT100, then it wasn't worth doing) made it pretty straight ahead.

This discussion is closed to new replies.