Hp Cpmpaq nx6110, wont start just dead ! !

By craigg_b_rocm ·
Hi! this is my first question, im looking to see if anyone would have a reason as to why my Hp Cpmpaq nx6110 wont start (or do anything) When i plug in the AC the power light on the front flickers, however when i try to power up nothing atall happens not even the fan or any beebs ? anyones thoughts would be grateful!
Thanks in advance

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -


by balge In reply to Hp Cpmpaq nx6110, wont st ...

only time Ive seen this was a shorted out motherboard.
hopefully something less serious for you - test the PSU if you have testing gear or try a substitute? make sure the ATX power lead is plugged into the board properly. is the wall socket/plugs/cable good ?

Collapse -

Pull out your battery

by The Scummy One In reply to Hp Cpmpaq nx6110, wont st ...

and unplug the unit. Wait a minute or 2. Plug in the unit without the battery. Does it start to boot?
If so, power it off, replace the battery, and try again. Does it boot?
If so, you are fixed, if not, replace the battery. Also try this site as there is a recall for some HP batteries, including some for the nx6110.

Collapse -

Try this...

by dazeboy79 In reply to Hp Cpmpaq nx6110, wont st ...

have you tried booting in safe mode?

have you tried replacing the battery/Power supply?

could also be hard drive or mobo

Id try the HP support forums and/or call tech support, that is afterall what you paid the big $$$ for...


just google around a bit and see if you can just start eliminating possible causes one by one

Related Discussions

Related Forums