Question Locked

I can't access OWA from outside SBS 2003 Site

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
SBS serves up OWA from inside the building just fine... but OWA is not accessible and we get no error from outside the firewall. I have the ports open, and OWA with SBS 2000 (Exchange 2000) worked just fine. What is the difference between the SBS 2000 and 2003 setup that is making this broken? Any guidance would be greatly appreciated.

4 replies

by dwilliamsamh

You response was helpful but I found the problem actually went back to initial setup. #1 was that Routing and Remote Access was not setup during the installation process. I think this was due to the fact hat as I was going through the wizards I answered "no" to the internal firewall setup. I did that because we had a hardware firewall, and for the sake of simplicity I didn't think it was a good idea to have more than one active firewall, and as a general practice I prefer a separate hardware fire wall.

Once I went back through the Internet and e-mail setup wizard and enabled the SBS 2003 Firewall things got working with some minor tweaks (WINS was pointed at the wrong IP for instance) to correct the settings left over from the original setup. Thanks for your help.

I guess the lesson here is that SBS is "tuned" for the wizards to take control of the initial setups and defaults are the way to go. Once everything is working you can always scale back. But it is more difficult to "add it later."

Doug

by rob miners

SBS and the wizards a breeze compared to setting up NT4. But they can be a trap for the unwary. I sort of skipped 2000.
Glad to see you up and running.

This discussion is closed to new replies.