I just need to vent about consultants....
This is page 2 of the discussion. Read the opening post
Community archive
This is page 2 of the discussion. Read the opening post
by now left tr
"A scenario that should be a qualification for doing the job"
What goes around does not always have to come around. This attitude stinks.
by nicknielsen
was that you should not be allowed to consult until you have worked with a consultant as a member of an IT shop. Of course, the consultants who need this the most are those least likely to learn from it.
Not all consultants are a$$holes; not all IT managers are the good guys. But if you are an a$$hole as a consultant, the word will go around and eventually work won't come around. This is life.
by dr_zinj
1. Professional Ethics. Any consultant worth their pay is going to bring their own materials needed for the job. That includes backups in the trunk of their car/van/what-have-you. And materials supplied by the company will be stipulated in the contract.
If you have consultants prowling around snagging stuff around your business; then you don't have a consultant, you have a theif. They're costing you loss of productivity in trying to locate 'mis-placed' materials and equipment. And you may find that you've lost a lot more after they're gone.
2. Business needs. Your business hired the consultant. It's your responsibility to get the most for your money. Usually the longer they take to do the job they wee hired for, the more it costs your business.
Make it plain to the consultant that they should come to you for their needs if they haven't supplied them already. Keep a list of materials consumed by the consultants; especially if you have a clause in the contract that reduces their award for supplies provided above that stipulated in the contract.
by rob
If someone started picking around in my cube without direct permission, I'd tell them immedately and firmly to get out of my cube and that they do not have permission to use any company owned equipment without direct permission first. Document everything, and make sure the "consultants" know you are.
The group you have in there are not professional by any stretch. IMO, you need to bring their behavior to whomever was responsible for their presence. If they blow you off, you don't want to work at this place anyway.
by ryanlair
by shraven
Hey buddy, when a company pays a consultant to come in and do something, guess who the "customer" is? The one paying! Novel concept, but one you obviously can't grasp.
Considering the exorbitant charges consultants levy, fairness would be charging them $100 for a keyboard and 2.5 times cost, plus handling and shipping for ordering a power supply. And yes, they should arrive at the customer's site equiped to do the job.
by mhbowman
IT's convinced that he's the hero who's the answer to everyone's prayers and should get whatever he wants.
The reality is you've hired to do a specific task. I've seen great consultants who are experts and very appreciated for the work that they do, and solutions the come up with. The other two-thirds are the ones mentioned by ITChick.
In addition to what she's described I've personally walked in while they were on the phone with another consultant working to solve someone else's problem on my company's dime.
With your attitude you wouldn't last 5 minutes before you'd be sent packing regardless of your supposed skill set.
MB
by mark
It's easy for someone with a full-time job to think that my hourly rate of $85.00 to $125.00 (depending on the project & duration) is "exhorbitant," but you have to remember that out of that not only do I need to make a living, but I also have to pay both my and the employer's portion of federal and state withholding, 100% of my health care insurance, 100% of my disability insurance, and 100% of my retirement. I also don't get paid sick leave, vacation time, or a pension. In addition to all that, I'm rarely able to bill for a full 40 hour week, because I have to spend time marketing to keep the pipe full.
Many employers calculate that employer-paid benefits (such as health care, vacation & sick time, pension, etc.) adds more than 25% to what it costs the company for your employment over your base salary. You don't see all of those benefits on your check, but your employer has to pay them, and so do I.
That said, the reason I'm self employed is not because it's more lucrative, which it certainly isn't, but because I never disagree with the boss, and every day is different.
by tracyb
A couple of things? (and I didn?t go through the entire thread so this might have been addressed but?)
First of all, us consultants are paid a lot of money to assist you and your company with various needs. I personally specialize in information security but that?s another story.
Well, that may not be another story. Many of the companies I work for have policies against un-approved, non-company owned equipment being connected to the company network. That is something that all companies should consider adopting. While I keep my equipment in tip-top shape, free of viruses and such, I wouldn?t count on everybody doing this. How would you like it if a consultant brought your network to its knees by introducing a worm?
And If I am getting paid lots of money, and if I can?t connect my own equipment, then you or someone in your company had better have a workstation ready to go the second I walk into the door so I can start being productive immediately!
Can?t speak for everyone but I prefer to get my job done as quickly and efficiently as possible. I remember one contract with a bank where I was sitting around twiddling my thumbs for a month before they granted me access to everything I needed to perform the work that they were paying me $125 per hour to do. That, in my books, is a loose, loose. I hate being board, the company lost 20k of my productivity, and I was a month longer in helping you get your technology solution into a state of its own productivity (more dollar losses there).
I would suggest that if you want to advance both your career and the general goals of your company you take the lead in ensuring that us consultants have the proper tools we need to help you and your company. If on the other hand you are just holding out for retirement - continue as you are ? complaining about us consultants!
by rlyonsmd
by nicknielsen
by tracyb
I guess I was just modeling after the original post - and with that said I thought I was rather pleasant :-)
But seriously, I?ve worked with some pretty negative people in the past both as a consultant (to the negative employee) and as a fellow employee. People, especially employees, need to realize that the company is not there to offer them a paycheck each week; it?s there to provide a return on investment to its owners. As an employee or a consultant it is our job to do the best we can to make that happen.
Also, as a consultant, I get calls at 8:00pm on a Wednesday night and am asked to be half-way across the country at 8:00am the next morning. While I try to keep a ready bag with most things I might need - every situation is different and YES, I?m human, I do forget things at times. I agree that it is my problem not the employees I am working with but since we are going to be working together I think that a better attitude on everybody?s part would make the job and life much easier!
by r.a.m.
by falconeer
Ha, that's really funny. After some 20+ years of both sides of the fence I had a fellow who called me Num-Lock.
It was because I refused to use the new-fangled addition of the 'numbers' pad. A habit also acquired because I love to play games...
Anyways, M2Cents
by greytech
After more than 30 years in this business I've learned to live with all sorts. I have also been on both sides of this fence.
As several have already mentioned, consultants have a job to do and if you have the task of supporting them then you need to do it with good grace whether they are jackasses or not. The object is to get the most out of them so the project gets finished properly and quickly.
If your company has not laid down the rules clearly, as is often the case, then you need to make it clear to the consultants what you consider acceptable. Do it in a friendly and profesional manner so they have no come-back. Make sure that you make it clear what your role is in supporting them and perhaps that it does not include changing their daipers.
One problem is often that someone gets off on the wrong foot and the relationship moves immediately into an antagonistic one instead of a professional one. If you don't fix that, then you are likely to be the looser, because "management" will perhaps take the side of the very expensive team "they" hired.
I am a very assertive type and this is often mistaken for agressive behavior. I therefore often have to quickly back off to re-establish a professional relationship so that the project gets done and I get paid, and I get more work.
Keep it busineslike and not personal that way you can stay cool and maybe the jackass feels the heat.
by iammr2
by menace65
this vent of mine certainly did not die, did it? It's interesting to see that those who blasted me did not even bother to read all the posts in which I made clarifying statements, so here is a synopsis:
1. The items in question were NOT ones the consultants needed to do their freaking jobs.
2. I have been extremely helpful to the consultants, to the point I have all their access set up for them PRIOR to their joining the project.
3. There are, and there always will be, consultants, employees, insert noun here, who are inconsiderate jackasses, and it's those types I am venting about.
Just today I was asked for a screwdriver...I actually happened to have one...it was not right the *kind* of screwdriver... I guess I should have said, "Don't worry, I'll run out right now and buy you one!"
Uh, oh, jackass is back...gotta go!
by tig2
I think that you have the sympathies of many of the consultants/contractors here. We have had to deal wtih the kinds of braindead morons that you have described. I don't know that any of us have ever figured out the magic answer.
It does sound like something that can have some negative impact to the project however. How do you feel about your PM? Are they someone you can enlist in this? I know that I would consider this to be an issue worth addressing as it doesn't allow the team to come together well.
If your PM is someone that will hear you- and you really are the best judge of that- try discussing what you see as the issue- that you are trying to provide service but it is difficult to do. You have fulfilled your obligations but there is an obvious disconnect in EXPECTATIONS. I would approach from the standpoint that you really can't provide what you don't know. And there is a process for people to get their needs met. Also find out from the PM if there is a tolerance for additional billing- as in, you will facilitate the order of an additional power supply billed back to the project.
My guess? The PM doesn't want to pay additional costs. And the PM is better positioned to put an end to the silliness- especially when you charge back the hours it takes to hunt up all the equipment that has gone missing.
Incidentally- I have had the same tool kit for over 10 years. I don't loan ANYONE a screwdriver if they plan to take it out of my sight! Had too many of them go missing... Spent a lot of time as a support tech!
Hang in there, the good thing about bad consultants is that they inevitably go away.
by falconeer
Maybe you might give the poor fellow a stiff vodka & tonic.
I hear it?s relaxes the inner turmoil of people who really need to be elsewhere.
I am appalled with the misspellings of our group. Well maybe I want to impress, or don?t like to appear ?stupid? but the new technology of multitasking will allow one to open Word and kludge away knowing that most of the (read, my) blunders are caught with rapid, rapt attention.
Of course it can't make me non-stupid; that's my responsibility. Or is it?
Good luck with JA.
by briggch
by silverbullet
by nicknielsen
by nicknielsen
The impression I got was that she was venting over the behavior of the consultants, not that they were there.
Im my case, regardless of my personal feelings about whether you should be in my shop, I will act professionally unless you give me reason otherwise.
Once I have that reason, you can...I think you get the picture.
by upuaut
I've been a 'consultant' for 12 years. I've worked on projects for very big and very small companies. All provided the equipment. I would not have mind to get my own.. actually I rpefer to do that. But for securtiy of the company's network, a smart company will provide you with what you need.
I do not think it is smart for a company to have policies, written or unspoken, to have different treatment for an employee vs a consultant.
by randy hagan
I work as a consultant today. Have for the last 15 years. And I agree with you, there is no excuse for laying the five-fingered discount/appropriating client resources without permission or documentation. You have every right to be annoyed by what you're experiencing.
That's not to say that consultants don't need to provide consultants needed resources to do the job.
I currently have a client's new laptop in the shop for developing documentation, because it has their configuration and their resources set up as they will be for client rollout. I specified the need in my service plan, set the terms for using their equipment, and will abide by them from the moment I picked up their gear to the point where I return the gear to the client.
There are also unforseen times when I need client euipment on the fly. But I ask for it first, and document that I needed it and provide that documentation to the client. I also document when I return it and provide a thank you to the person who provided what I needed.
I don't know if this is "normal" practice, but it certainly isn't mine.
by itinatl
Sorry it took me a while to gt back to you, but I did a little research and found out a few things...
You say you own (quote) 'two successful companies' (unquote).
Apparently the truth is that you work in Level 1 Support for AOL and earn about 60 cents a day plus bread and water.
Why you would lie to the members of TechRepublic I am not sure, but I doubt that those members would believe that you owned a pair of socks without holes in them, let alone that you own 'two successful companies'.
The answer to your question would be: what is the most cost effective answer for your company?
You are paying that contractor $$$ a day to be there and do work. If they can't do their work, they are still on the clock and nothing is getting done. So does it make cents to provide keyboards and mice? Absolutely. Consider the cost of a basic keyboard or mouse - $20 or less. That consultant is charging you at least $100 / hr, probably a lot more. If providing them a keyboard or mouse saves them 10 min of work, it has paid for itself and then some, especially since you get to keep it afterwards for future use. There comes a point of being petty. Just get the job done.
In the case of the consultant above, you have a different situation. He should get off his arse and on *HIS* time, go out and locally purchase a power supply with *HIS* money. All productive time spent by him to resolve his computer issue should be deducted from the charges by his employer. If they question why, tell them it was because he came unprepared to do the job he was being paid to do and you deducted those charges.
by mr_rc
At the last company I worked for, I worked with 3 different consultants (at different times). Of the 3, only 1 was bad.
The first consultant I didnt even know was a consultant, I thought they were a regular employee. They didnt make any waves, acted like part of the crew and basically blended in pretty seamlessly. It wasnt until the project was over that we found out that it was a consultant we were dealing with, we were sad to see him go and went for drinks on their last day as a farewell. We supplied all the hardware for the job, and they were left to crack on with it.
Our second consultant was a woman, once again management didnt mention anything to me. She came in on her first day, introduced herself, explained to me what she was doing here and what she would need from me. She had her own laptop which was barebones, OS, office, AV/AS. What she did for each job was wipe the laptop and use a ghost image of the base programs so she wasnt bringing anything harmful with her. For the duration of the project the laptop remained in the office to avoid being compromised and if any further kit was needed, she put through the required forms and followed procedure.
She was incredibly professional, and because she took that hour initially to introduce and explain her position, we had a very respectful working relationship. Honestly a pleasure to work with.
The last consultant I dealt with, was the absolute worst. If this person was the first consultant I'd dealt with, then I'd make it my job to make sure none were ever hired again. Even if I had to give up my evenings and weekends learning a skillset that I might only use the once.
This time I was informed a consultant was coming, and after my last two experiences, I was looking forward to it. She barged into my office when she arrived at 10am (we start at 8am) and started barking orders at me and making demands. Needless to say, she got on my bad side from the word go. She was rude and arrogant, often taking things to her own office without letting anyone know or even asking.
Often I had to go hunting for stock that I knew I had, it was still listed in my resource list but wasnt there. Every time I would either find it in her office or get the 'I left it at home'. So I started documenting everything that was missing, documented her rude, arguementative and unprofessional behaviour and language and put it all through to my boss.
Unfortunately, this consultant was a friend of the bosses family, so this got me absolutely nowhere except to make the consultant absolutely hate me. I did stay professional, I did continue documenting and I somehow (even now I'm not sure how I managed it) kept my cool through the whole ordeal.
Her project went over time and budget, numerous staff left the company rather than work with her anymore, the phone bill went through the roof due to her international calls and it wasnt until the company started getting into some serious financial trouble that my boss started paying attention to what I was saying. This wasnt a power struggle, or me against her, it was me trying to keep the company afloat.
When her contract was finally terminated, I submitted the hardware list of all the property to be returned or payed for, it came to well over $10,000 AUD.
It was afterwards that I found out that she was trying to get me fired as well but the thing that saved me was that I made everything work, nothing was ever too much trouble for me, and I had a rapport with all the staff. (not to mention I was the only person who knew everything there, I did have documentation but it was kept offsite for security.)
Though I dont blame the last consultant entirely, if my boss hadnt turned a blind eye to what was going on, things probably would have been a hell of a lot different.
All I know is that I did my job properly and professionally...
by sctang73
Been in the industry for 10+ years. Worked for consultation firms, internal IT teams and even had my own shop at one point. I can honestly say that you have unfortunately encountered one bad apple amongst many good ones.
As some previous posts have already mentioned, communication is absolutely critical. I also live & die by the phrase "Karma is a revolving door. What goes around, comes around." Thus, if I don't ever want to be treated like a jackass, I make it a point never to act like one.
All humans are capable of acting inconsiderately towards others, especially in the work environment. It is neither justifiable or excusable, but crap happens.
I have tried to always come prepared (at the expense of my back and knees) whenever I go to a client site. As I live & work in NYC, I endure the occassional bag searches and bomb sniffing dogs. Cops/ security guards ask me all the time "what the hell do you carry in here?", as I routinely carry 30+ pounds in my backpack.
I am very independant and don't like to bother people for stuff - IMHO, an unprepared tech is either sloppy or irresponsible (extreme rush jobs are an exception). At the same time, I also dislike dependant people who need to borrow everything, be guided/ helped along like little children. There is no place in the professional world for people who act that way.
There is also no place in the professional world for people who try to bully/ intimidate others with a god complex. Remember - a consultant is brought into another's home turf. Chances are, you will be outnumbered by a bad ratio. The numbers game will always win even if you're actually right. No one likes an arrogant know-it-all. Asking nicely can yield much faster and more accurate results than huffing and puffing your way to an answer.
Bottom line is that consultants are paid to work & BEHAVE professionally. If a client pays you the agreed sum to complete a job, you had better come out w/ guns blazing. Be prepared to do work and answer questions. Make the client regret not hiring you sooner and not regret hiring you to begin with.
by m_johnson
This discussion is closed to new replies.
Sort by Trending