Question Locked

inspriron 8500 notebook battery not charging

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The notebook is about 4 yrs old and not under warranty, The orginal battery stopped working along time ago. I purchased a new battery from Dell specificly for this notebook, The new battery came with 32% charge, but I can not make it fully charge. It has been left on ac power for three days, and still not charging. I had two lights on the battery when I received it, but as I used the battery (which does work) I have now dropped to 19% and only one light. Anyone have any suggestions?

9 replies

by thumbsup2

Your power adapter may be out, or possibly where you plug the power adapter into the computer (power port) may be bad.

The only way you'll know which one it is would be to try the cord on another laptop of the same model. If the cord works there, the power port on your laptop is gone.

You might try taking it to a repair shop. They should have a way to test the cord and power port for you.

by merdi

A call to Dell tech suggested I replace the ac adapter. The adapter I was using was not very old (1yr), but I purchased another one from Dell. Didn't fix the problem. When I look in the BIOS it say the AC Adapter: unknown, but it came from Dell and it's the same one that orginally came with the notebook, I tried updating the drivers, because I have replaced the operatoring system from XP PRO to Vista Enterprise. I thought that might be causing the problem, but The new drivers were installed and it still doesn't work. I think I might need a new system board, but at 395.00 I might just get a new notebook. This notebook still work as long as it's plugged into power.PS. I tryed to flash the bios, received the mesage to plug in the ac and battery, both were connectd.

by oh smeg

Some NB's will not charge the battery when loaded with Vista.

As you have already done everything else you need to install XP back again and see if that cures the problem. If it does then you have a Incompatible NB and you should avoid Vista. If it doesn't then the most likely scenario is that the M'Board has failed.

If it used to work with Vista installed it's possible that a recent Security Update has killed off this function and simply not installing the offending update may be your answer.

Don't ask why this happens I don't have a clue but it has happened in the past several times.

Col

by oh smeg

By testing it with a Multimeter at the plug that plugs into the NB. The Adaptor has the voltages that it works at on the box in the lead which should be an Input Voltage of 110V AC and an output voltage of somewhere around the 14 V to 20 V Range but look at the printing on the Adaptor to be sure.

Col

by absolutely

If you don't know, it maybe just that the battery level is not displayed accurately, a problem I solved on another brand of laptop by fully running down the battery once before re-charging. Like hitting the 'TARE' button on a digital scale, you have to reset the measuring device's definition of 'zero' occasionally to keep its measurements of non-zero quantities accurate.

by merdi

This is a new battery. It came with 32% charge. Attemps to use the battery has now gotten it down to 10%, Someone suggested maybe I need to totally discharge the battery and maybe it will start charging if totally empty. I don't think the problem is that simple.

by mocefish

when you recharge it? do'es it say it is rechargeing? If not you have a bad charger or connection between the recarger-interconnection board-battery. If it charges any or says it is recharging the battery is TU

by boxfiddler Hot topic

Connectors is probably not the correct term, but I am referencing the equivalent of auto battery terminals. If those 'terminals' are dirty this may be your problem.

This discussion is closed to new replies.