Question Locked

Internet Explorer

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I installed Windows XP Pro and I make the connection to DSL but the Internet Explorer 6 does not activate and go to a home page , therefore I can not get on the internet . I am a novice at this . Any step by step instructions for making this work ?

6 replies

by seanferd

Once IE loads, it may have a home page from your ISP. If not, type a web address or search query in the address bar. You can set your home page to anything you like.

If you are having other connection-type problems, let us know who your ISP is, and how your computer is connected to the internet. (DSL modem, modem and router, combination modem/router (gateway)).

by bartcartercwi

I have AT&T DSL and yes I double clicked . I had XP Pro installed previously by some one and I found out it was a bootleg copy . I then purchased a legit. copy and installed it . To connect , I think I might have to re install the AT&T DSL .
After it connects to DSL and I try to quick launch or double click the Internet Explorer icon , an error window appears . I am on a different computer at this time . I am at work .

by seanferd

It would help quite a bit.

Frankly, I found it easier to set up without using the AT&T software.

Let us know also if you are using a router (like the 2Wire) or one of those smallish modems.

Right now, I can only guess where your connection is failing. Could be between computer and modem or router, or between the modem or router and the internet.

It sounds like you account is already active- you aren't waiting for AT&T to turn it on.

If you had internet access before, then reinstalled XP without setting the network up, this may be your problem. Either run the AT&T setup disk, or the New Connection Wizard (Start Menu\Programs\Accessories\Communications).

If you can post back with the error, we may be able to narrow this down for you, but running either setup again won't hurt, if that is a faster option for you.

Oh- you can also try unplugging the modem or router power for a few minutes, and plugging it back in. If that doesn't work, tell us also if all the status indicator lights on the modem or router are green. Any red lights will indicate a problem between the router or modem and the internet.

by bartcartercwi

I will have to do that tomorrow . Thanks for the help so far . I will go home and try a couple of things .

by oh smeg

And make sure that everything is installed. Depending on how you installed Windows here you may not have any of the necessary Drivers for your Hardware installed so things like Sound, Ethernet are not working.

Left Click on Start, then Right Click on My Computer and in the drop down list left click on Proprieties. In the next Window to open left click on the Hardware Tab and when that opens left click on Device Manager. Look for any Yellow Triangles with Black ! through them. This means that the drivers for that Hardware [b]Is Not Installed.[/b]

You need to use either the Driver disc's that came with the computer on the Recovery Disc or on the Hardware install Disc's. If you do not have these you will need an application like Unknown Device Identifier to find out exactly what Hardware you have and what Drivers you need.

http://www.zhangduo.com/udi.html

If you have a Realtech Sound Card in your computer you will need to install it's Drivers before connecting to the Windows Update Servers as these are not Digitally Signed with M$ and [b]Can Not[/b] be installed after M$ Windows Genuine Advantage has been loaded onto your computer.

Col

This discussion is closed to new replies.