8 replies
by d_v ant
Open a management console. Add IP Security Police Manager snap in to it. Check under the Secure Sever (Required Security) properties and make sure that you have All ICMP Traffic unchecked. Also check under Server (Request Security)for same. If it ischecked, your 2k machine will do as you described. After removing the check (if necessary) right click on all policies in the right pane of the console and select un-assign. It should be the first menu item. If it says Assign, do not select it. After making the necessary changes, go into your services and restart the IPSEC Policy Agent service. That should solve your issue.
See Microsoft Articles Q253169 Traffic That Can--and Cannot--Be Secured by IPSec and Q257225 Basic IPSec Troubleshooting in Windows 2000 for more information.
by bobwh
by lordinfidel
Check the simple stuff first.
Check your IP configuration on both machines. Make sure that the subnet mask and Ip address is correct.
by bobwh
by bobwh
Have verified hub,cables,nics. Network works fine with ipx/spx. Both computers have no DHCP, no IPSEC, no WINS, netbios is enabled. IP addresses are 192.168.0.1 and ...100, subnet masks 255.255.255.0.
Tried suggested remedy and could not start the ipsec policy agent service.
by lusu
The TCP/IP property window has an "Advanced" button that will open a second window. Go to the last tab and make sure you do not have the TCP/IP Filter enabled...
Lusu.
by bobwh
by bobwh
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending