Community archive

Ask something
Discussion Locked

IRQ Conflicts

0 helpful
3 replies

by ajaamac10

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm Having IRQ conflict with my Computer which I reasonly installed Windows XP. This is a report that I copy from my system. can any one help PLEASE.
System Information report written at: 5/12/2002 2:40:31 AM
System Name:
[Conflicts/Sharing]

IRQ 11 Microsoft ACPI-Compliant System
IRQ 11 3dfx Voodoo5
IRQ 11 VIA Rev 5 or later USB Universal Host Controller
IRQ 11 VIA Rev 5 or later USB Universal Host Controller
IRQ 11 3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)
IRQ 11 Creative SB Live! Value (WDM)
IRQ 11 NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)

Memory Address 0xD0000000-0xD7FFFFFF VIA Tech CPU to AGP Controller
Memory Address 0xD0000000-0xD7FFFFFF 3dfx Voodoo5

Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF VIA Tech CPU to AGP Controller
Memory Address 0xA0000-0xBFFFF 3dfx Voodoo5

I/O Port 0x000003B0-0x000003BB VIA Tech CPU to AGP Controller
I/O Port 0x000003B0-0x000003BB 3dfx Voodoo5

I/O Port 0x0000C000-0x0000CFFF VIA Tech CPU to AGP Controller
I/O Port 0x0000C000-0x0000CFFF 3dfx Voodoo5

This is how my resource report look like

IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK

IRQ 3 Communications Port (COM2) OK

IRQ 4 Communications Port (COM1) OK

IRQ 6 Standard floppy disk controller OK

IRQ 8 System CMOS/real time clock OK

IRQ 11 Microsoft ACPI-Compliant System OK

IRQ 11 3dfx Voodoo5 OK

IRQ 11 VIA Rev 5 or later USB Universal
Host Controller OK

IRQ 11 VIA Rev 5 or later USB Universal
Host Controller OK

IRQ 11 3Com EtherLink 10/100 PCI TX NIC (3C905B-TX) OK

IRQ 11 Creative SB Live! Value (WDM) OK

IRQ 11 NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI) OK

IRQ 12 PS/2Compatible Mouse OK

IRQ 13 Numeric data processor OK

IRQ 14 Primary IDE Channel OK

IRQ 15 Secondary IDE Channel OK

Thanks!

3 replies

by ferocious

see if you can assign the sound card to IRQ 5 and the video card to IRQ 10 manually in Device Manager. If not shut the system down and swap the positions of the cards, with the NIC at the bottom and the video at the top. You can also try removing them from Device Manager, shutting the system down (turn off the switch on the back of the PC, if it has one) and turn it back on.

by ajaamac10

Thanks for your help,
I've tried assigning the IRQ The sound card and Video card to IRQ 10 manually, but I counf assigned them. The device Manager om Xp wound not giveme the option to change.tried remove get worst, tried swap the positions of the cards, no luck. i also tried from the Bios but I would figure out how to do it, i cound see all IRQs, but how do i assign the individual card.

Thanks all your help.
:-

by mert gülsoy (mgulsoy

if your bios supports it let 3dfx voodoo not to have an irq. At the second pci port from the top, place the nic
place one empty slot
place the sound card
(if possible)
place one empty slot and place the another nic.
check the setting about assinging irq(i cant remember it's name) it must be escd or auto. reboot your computer and when your bios shows info about your pci devices press pause key and check the table. One of your nics or your SB must take the irq 5. if not try another motherboard

This discussion is closed to new replies.