9 replies
by thechas
Ghost should do the trick.
Or, many drives come with utilities that make it easy to copy an old drives contents onto the new drive.
I have used the utility that comes with Western Digital drives, and it works well, IF you run it manually, and just copy the drive contents onto partitions that you have setup with fdisk.
Another alternative, is to boot into DOS from a floppy, and use the DOS copy commands.
xcopy should do the job.
Chas
by jdam4921
by cg it
by jdam4921
by sgt_shultz
put the new drive in the computer along with the old drive, get it f-disked and formatted, then from windows, run a command prompt. then run this command: (let's say your old drive is c: and your new drive is e:)
xcopy32 c: e: /c /h /e /k /r /f
that will copy the new hard drive to the old hard drive.
to understand what you are about to do, first run xcopy32 /? to see what the switches do.
hope this helps...
i'd do a ghost anyway, but xcopy32 is a great, built-in way to dupe hard drives inwin98, imho.
by jdam4921
by paulp
by jdam4921
by jdam4921
This discussion is closed to new replies.
Trending Software posts
Sort by Trending