Storage

Ask something
Question Locked

Keyboard not responding during CD Boot

0 helpful
9 replies

by infernal acolyte

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm trying to do a clean format on my PC but during the event I've encountered an issue regarding my keyboard.

I've already setup the CPU to boot on the CD. It did successfully however when the "Press any key to boot from CD" appears, my keyboard doesn't respond whatever key I press.

Is this a BIOS issue, my last approach would be resetting the BIOS. Is there any workaround out there?

I'll appreciate any help.

9 replies

by rob miners

If it is PS2 and it is not working when you try a known good keyboard it is probably the PS2 port on the motherboard that is at fault. Try using a USB keyboard.

You could check the BIOS settings: Switch on USB keyboard and mouse support if it isn't enabled.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

by infernal acolyte

and unfortunately it isn't solving the issue. I've used both a good PS2 and USB keyboard and it didn't solved the issue.

My last resort would be updating the BIOS. Its my first time doing this so please cross your fingers... ^_^

by rovan21almeida

Hi,

First check the Keyboard cable which has properly connected ,Second In bios Enable Usb support ...If it is not happening means
there might be problem with keyboard port... check it

by infernal acolyte

and unfortunately it isn't solving the issue. Both USB and PS2 ports are working fine.

by infernal acolyte

I'm quite baffled on why the BIOS was corrupted. I've reformatted the said PC before and I don't have any problems on the keyboard.

Anyone has an idea on why the BIOS can be corrupted? Can it be done by a virus?

by infernal acolyte

I'll try the ones that seems to fit my issue. Thanks for pointing me to this article. ^_^

This discussion is closed to new replies.