Discussion Locked

Lockup of PC(WIN98) when printing to HP

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Scenerio:
Win98SE on a 233mhz PC, 96mb ram, IE 6.0, HP Laser 6L with jet direct card.

I am able to print to the printer in Word, Excel and other programs. When on the internet and I want to print from a web page, the PC locks with no error.. nothing. Other PC's on the network print no problem.

Any suggestions? Help! Thanks for the answers.

12 replies

by dmiles

Are you running the latest drivers for your printer,and other hardware devices
Check the Anti-Virus software configuration and see if it is scanning in the background
Does the other conputers have the same amount of memory installed?

by zlitocook

Update your internet explorer, if this dose not help compleatly remove it and reinstall. I.E. had problems with network printers with older versions. Try opening I.E. with out connecting to the internet, work off line. Then open files on your computer and try printing. You should be using I.E. 5.0 or so.

by mja

I am running Internet Explorer 6.0 as per my scenerio above... but thanks

by timthetoolman

As I understand it, when you print from the Web, there is some internet interaction with the page.

My guess is that you have some sort of conflict between your nic and the jet direct card.

Try updating and re-installing the drivers as others have suggested, but you should also try moving one of the cards to another PCI slot.

Often PCI slot 5 is a bit dodgy for network cards as it has shared IRQs associated with it. I wouldn't put either card in this slot.

Cheers,
Tim.

by mja

I have changed the NIC and the drivers already.. I thought that it would clear it up but it has not. Thanks

by mja

Soulrider.. I wanted to leave your answer open and try it. Can you post again and I will award you some points? Thanks

by cruncher_1

It sounds to me like the problem is in Internet Explorer. I would go to control panel>add/remove programs and click IE. You will have the option to repair or uninstall. I have fixed several problems here. I try the repair first. If that doesn't work, uninstall. It will go back to your previously installed IE. See if you can print now. If so, reinstall IE6 and see if the problem is still there.

Good Luck.

by philthegreat

cruncher's method is nice.
But I would recommend the following steps:
1) Check any other problems when you are using the IE. (ensure IE problems)
2) repair the IE is not the best method; but using the Windowsupdate.microsoft.com
is better.
Connect to this page and it will scan your computer.
Then click on the "installed" components; not the new install components.
Choose on the IE 5.x/6.x and re-install by this.
Then it will fix all the problems even you are not aware of them.

But if it prevails, then set the resource meter of the Windows. It may be the resources problems.
1) run--> "msconfig"-->click out all the unnecessary programs in the start-up options.
2) use a RAM memory controller like FreeMem.
3) Don't use too much IE windows opened.
4) ....

This discussion is closed to new replies.