Question Locked

Low battery warning - MS Wireless Optical Mouse (in XP)

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've been bugged totally out of my brain with this stupid mouse battery low warning box with my MS Wireless Optical mouse.

All too often, this box pops-up warning that the mouse batteries are critically low. In the mouse control panel, it shows that the batteries are good, and the signal strength is excellent.

Personally, I don't care if the battery really IS low. When the cursor stops, I'll change the frikkin batteries. I don't want that stupid warning to keep annoying me.

Any ideas how I might go about eliminating it anyone??

20 replies

by w2ktechman

If so, the batteries were likely designed more for cameras and other devices as such. Try switching to different kind of rechargeables.

by djlenweb

Nope.. Eveready Energizers.

The batteries are perfectly ok. The warnings have always been happening, they have just driven me to breaking point. I'm going nutz.

I just want to stop these warnings altogether. I'll change my mouse batteries when my cursor stops moving.

by oh smeg

This is not something that I've had a problem with previously but I suppose it could be a faulty Mouse. I had to have several Changed when I was first given the WiFi Mouse & Keyboard as they where doing some strange things and I'm now on the Version 5 Drivers which seem to work OK.

http://tinyurl.com/4orzj

The only other thing that I can think of is that if you installed the drivers off the M$ CD they have drivers for quite a few different Keyboards/Mice so maybe you installed the wrong driver for your unit.

Col

by djlenweb

I usually pride myself on keeping up to date with the latest drivers for as many of my doodads as possible. Well, I was using v6.0 drivers, and just now downloaded and installed v6.2

We'll see if that changed anything.

Still, whether it did or not, I'd just like to be able to turn OFF the stupid warnings. I choose NOT to have them. The cursor freezing on the screen is warning enough - mouse is dead, change the batteries - SIMPLE

by oh smeg

And need the Screen to tell than to change things so M$ offers Applications like this for the lowest Common Dominator.

Like you are breathing and using a Computer so you need this to pop up and tell you what to do. Drives me nuts as well I might add. :D

Col

by djlenweb

Many are not that bright, and if they believed the warning, they'd spend their life's savings buying batteries if they'd replace them every time a warning popped-up. It'd be much cheaper to go out and buy another brand of wireless mouse.

Not sure yet, but keeping fingers & toes crossed that maybe, the new driver from microsuck might have fixed it - but I don't wanna jinx anything by saying that either.

Thanks for your interest, and I'll post again whether or not my nightmare's gone away.

...still would be nice to simply choose whether or not I wanna be warned.

I notice you're from Australia. I'm Australian too. I left Townsville N.Qld in July'98 to meet-up with my internet fianc?. We were married on St. Patrick's day in 2000 and still going strong. We plan to return to Australia to live in about 5 years.

by oh smeg

With the US $ getting lower than the floor, Interest Rates projected to be a 0% in the US soon and so on it doesn't sound all that healthy at the moment.

Col

by djlenweb

We can't move sooner, as she has a daughter who is only 13 (her father is still in the area), so we have to wait till she can decide what she wants to do. We'll have to wait till she turns 18. She's the reason I came here instead of my wife coming to Oz.

by djlenweb

I just got my first "Low mouse battery warning" since installing the latest drivers from Microsuck.

Now, I REALLY REALLY have to turn off that Frikkin' Warning before I lose my mind.

There's GOTTA be a way, come on fellas!!!

by w2ktechman

I only had an HP wireless keyboard/mouse. The issue for me was the batteries being used. I was using recharges, and switching from different brands worked. Upon looking into it, some rechargeables are designed for different uses, and perform best like that.

Come to think of it, even the duracells I put in (the newer ones with the blue strip) caused this error often.
The problem is that the batteries are being made for more and more specific devices to function well, such as cameras, etc. which stay at a low charge and then take a big hit and go back to lower useage.
I have found that for recharges, I had better luck with the ray-o-vac 15 min than duracell 15-min (Duracell 15 min charges work great in cams but failed completely in mouse/keyboard).

So, if the driver is not the issue, try a different brand/type of battery. As for disabling the message, I cannot help.

by djlenweb

The ussue is NOT dodgy or unsuitable batteries.

The Mouse control panel reports that the batteries are good, and that the signal strength is also good.

In the past, I have used Duracells, Recharg's (Ray-o-vac, duracell and eveready)), and I currently use the all purpose Heavy Duty Eveready Energizers.

The issue is NOT the batteries.

Somehow, the drivers & the software don't seem to be talking to eachother.

There MUST be a key in the Registry where the command to send a warning about low mouse batteries is sent from. I just want to turn it off. Please stay focussed on my real issue, I need to turn it off.

by djlenweb

As much as I ALWAYS use the wheel button for double-click, I've had to cave-in and uninstall the intellimouse software.

That %@$#& warning is completely useless, and has driven me to breaking point. With perfect, STRONG batteries (of any breed or style), it still pops-up the low battery warning ALL TO OFTEN - I've had it... I'm done

by w2ktechman

I broke my mouse, and trashed my keyboard. Went back to USB for some sanity!

by thumbsup2

.... the mouse battery low message was coming up because the signal was being interfered with.

The mouse receiver was sitting between the wireless router and the 2nd computer (laptop). When the laptop was powered on, the mouse on the primary system started acting up with the fake warning. By simply repositioning the receiver so there was less likelihood of the signal being confused with another, the warnings went away.

by djlenweb

I have the receiver sitting about 8" away from the mouse. Mouse control panel reports good signal strength.

I've uninstalled the mouse software, and have gotten rid of the warnings, at the expense of the wheel button (whick I ALWAYS used as my double-click). I'm now having to get used to double-clicking again. It sucks, but not as bad as the warnings.

by Former member

Double click with your mouse just do this:
right click on the "empty" part of your tool bar and select "properties" go to Start menu > customize > Advance > folder and search options, in there you will be able to select "single click". I hope this helps you.

Please post back if you have anymore problems or questions.

by older mycroft

The correct path is:

Start > Control Panel > Folder Option > General tab > Click items as follows > 'Single click to open an item (point to select)'

by djlenweb

I'll still have to get used to that as well, as I also single click (twice) on files when renaming, and now they want to open.

I just wish Microsuck would get their act together and write-in an option to use the battery low warning or not ...Oh sorry, THEN I guess they couldn't be called Microsuck, Ok..

by Former member

I am running Vista so that is why it seams different.

This discussion is closed to new replies.