Community archive

Ask something
Discussion Locked

Ltwinmodem problem with NT

0 helpful
1 reply

by shahabasvm

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi Everybody,

If anybody can help me to configure my internal modem then it 'll be a great help for me. I have been working on my Altima Supreme II laptop to configure my builtin LTWinmodem on Windows NT. I tried witl possible ways I can. But still its not working with Win NT. But it work with win 98.

I configured with COM2,COM3, COM4 ports. But overlapping occurs and not working the modem. It shows too many errors in event viewer.
Please help me. my email address is

shahabasvm@yahoo.co.uk

1 reply

by isaaca

Hello Shahabasvm,

This might sound really basic but is this modem Windows NT compatible, I know some winmodems are not compatible with windows NT, Also do you have the correct Windows NT drivers not Windows 98. If all that check ok, are the comm ports under your motherboard's BIOS active? In not please enable Com 1 3f8 and com2 2f8, don't select auto. Also go to Windows NT Comm port Setting and make sure they match up to the settings on the BIOS. Othe than that try moving the slot of the modem to another slot on the motherboard.

Good Luck,
Ivan I. Aguilar
MCSE, CCNA, CCNP, A+, MCP

This discussion is closed to new replies.