Software

Ask something
Discussion Locked

Mr

0 helpful
5 replies

by jagadeesha.sc

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I forgot windows domain controller password. Could anybody let me know how to recover domain controller administrator password?

5 replies

by nicknielsen

1. Remove all external covers from the domain controller.
2. Identify the password store. It will usually be a ribbed enclosure with a fan on top.
3. Place a 12-inch (30 cm) drift punch against the center of the fan.
4. Strike the punch sharply with a large hammer. The punch must penetrate the enclosure completely or the procedure will fail.
5. If you completed this procedure as instructed, the password will now be accessible.

by captbilly1eye

4b. Clean effected area with a well-dampened sponge (spraying with WD-40 may be of further benefit) and immediately cycle power three times quickly.

by jdclyde

but you gentlemen seem to have things well in hand, [i] although I would be concerned about why Pali is bending over in front of you....

This discussion is closed to new replies.