Discussion Locked

MS-DOS APPS PRINTING TO USB PORTS

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an older (1997) MS-DOS based application that runs on a Dell Dimension XPS T450 workstation running Win98 SE on a WinNT 4.0 network server. Under printer setup there is no option for a USB port. A laptop parallel cable connection is being used in conjunction with the USB cable. How can I redirect printer output to a local HP LJ 1220 that is using the USB printer cable?

5 replies

by curlergirl

The only way I can think of that might work would be to share the printer and then capture the printer to an LPT port through a "net use" command. NOTE - this should be an LPT port that does NOT actually physically exist on your workstation. For example, if your workstation has a single physical parallel port, it would be LPT1, so you would capture the USB printer to LPT2. Then, in your DOS app, just direct the printout to that LPT port. This would probably work, but of course it would also allow others on your network to use your printer unless you set it up so that you require a password for users to use it. If you don't know the exact steps to do this, email me or reply to this post and I'll give them to you. Hope this helps!

by maxwell edison

Here is an "expensive" option:

The CATC USB4DOS Protocol Stack software package from Computer Access Technology Corporation provides USB support under DOS for production line testing and embedded applications. DOS application developers needing to communicate with USB devices now have the ability to do so in a clear, straightforward manner. Using a simple software interface, applications can configure USB devices; monitor their activity in real time while quickly transferring data back and forth between them. USB4DOS starts at >> $1,000.00 << and is also sold in volume discounts.

http://www.catc.com/products/usb4dos.html

No, I didn't think you'd like that option.

However, you might try a parallel to USB converter.

Maxwell

This discussion is closed to new replies.