Discussion Locked

MS-DOS Prompt Short-Cut and VMM32

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Using the short cut "MS-dos prompt" to exucte DOS TSR programs is limited to conventional memory. Modifying the config.sys to allow upper memory, will not help beause the vmm32 will use all the upper memory no matter how big it is.
Please tell me how to limit the vmm32 to only use the 3k conventional memory and at the same time be able to use the upper memory from within windows DOS prompt.

3 replies

by 7nt

I'm not sure what you say is correct. VMM32 is only 20K and using himem.sys enables 360K of upper memory, leaving plenty even if the entire VMM32 is loaded high.

On my own system, I have the following lines in the config.sys:
DEVICE=C:\WINDOWS\HIMEM.SYS /HMAMIN=40 /TESTMEM:OFF /M:1
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS I=B000-B7FF
DOS=HIGH,UMB

When I shell out to a DOS window and run MEM /P /C, I get the following results:

VMM32 20800 Conventional Memory: 9504 Upper memory: 11296Upper memory: 141872 Used: 91712 Free: 50160
so only 9K of VMM32 is in conventional memory and there is 50K free upper memory available after all drivers are loaded high.

by nidal.kamal

I'm not sure if your answer descripe the problem I'm facing. This is the output of mem/p/c before loading Himem.sys in config.sys:
Name Total Conventional Upper Memory
-------- ---------------- ---------------- ---------------
MSDOS 18.048 (18K) 18.048 (18K) 0 (0K)
CPQIDECD 9.248 (9K) 9.248 (9K) 0 (0K)
DISPLAY 18.064 (18K) 18.064 (18K) 0 (0K)
HIMEM 1.168 (1K) 1.168 (1K) 0 (0K)
IFSHLP 2.864 (3K) 2.864 (3K) 0 (0K)
SETVER 832 (1K) 832 (1K) 0 (0K)
COMMAND 10.240 (10K) 10.240 (10K) 0 (0K)
vmm32 2.912 (3K) 2.912 (3K) 0 (0K)
WIN 2.240 (2K) 2.240 (2K) 0 (0K)
COMMAND 7.264 (7K) 7.264 (7K) 0 (0K)
Free 582.272 (569K) 582.272 (569K) 0 (0K)
Moreover,after trying your switches suggested for himem.sys the following output appears:
Name Total Conventional Upper Memory
-------- ---------------- ---------------- ---------------
SYSTEM 34.064 (33K) 10.544 (10K) 23.520 (23K)
HIMEM 1.168 (1K) 1.168(1K) 0 (0K)
EMM386 4.320 (4K) 4.320 (4K) 0 (0K)
CPQIDECD 9.248 (9K) 9.248 (9K) 0 (0K)
DISPLAY 8.304 (8K) 8.304 (8K) 0 (0K)
WIN 2.240 (2K) 2.240 (2K) 0 (0K)
vmm32 126.144 (123K) 1.104 (1K) 125.040 (122K)
COMMAND 7.264 (7K) 7.264 (7K) 0 (0K)
COMMAND 10.064 (10K) 0 (0K) 10.064 (10K)
IFSHLP 2.864 (3K) 0 (0K) 2.864 (3K)
SETVER 832 (1K) 0 (0K) 832 (1K)
Free 610.928 (597K) 610.928 (597K) 0 (0K)

This discussion is closed to new replies.