Discussion Locked

Netmeeting limited to 7 people?

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are using netmtg inside our LAN. The machines are all Win95b with a mix of Netmeeting 2.1 and 3.0, accessing a hosted meeting through static IP addresses. We are only interested in the Whiteboard (the audio is handled through a regular voice conference line).
Problem is... only the first seven connections are accepted. The eighth person attempting to join the meeting not only is rejected, but drops out of netmeeting all together. Is a hosted meeting limited to 7 connections? Why do I get the feeling that there is a very easy solution to this?

1 reply

by troydt

I think the mix of 2.1 and 3.0 might be part of the problem. Netmeeting 2.1 was limited to 8 participants; v3.0 has a higher limit. As soon as you get a mix, the meeting will lower itself to the least common denominator.

Here are some tips from the NetMeeting Developer's Kit: Once the meeting host is up and running, other peers don't have to connect to the host--they can connect to one of their peers instead. This does a "relay" of sorts. For example: the host starts the meeting; you connectto the host; then another person connects to YOU. YOUR machine will relay the meeting to them with minimal delay.

In WAN environments, you should typically have a fast, stable machine (Windows NT preferred) as host, and a single fast machine fromeach site connects to the main host. Then, local peers connect to their local "hosts", rather than jamming the WAN link to the main host.

One more note: have the host and the first joiner mute their audio by deselecting the microphone checkbox inthe Netmeeting volume controls. This will save a bit of bandwidth.

This discussion is closed to new replies.