Discussion Locked

No DHCP Lease - requires release & renew

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

Problem: Win 98SE workstations (normally laptops) require a 'winipcfg.exe' release/renew to obtain a DHCP lease, even when booted up from the network! (This also happens on some desktops which are permanently on the LAN... (?!)

(Note: The article Q194790 is not relevant, because we are on SE)

Some Details: NT 4 Server, single scope DHCP, Class 'C' subnet. All default values in DHCP manager, apart from '003 Router entry', which simply contains the router IP address...

-I'm thinking this is a server DHCP manager issue, because straight builds cannot see the DHCP server 1st off, or its a switch autoswitch type problem with the initial 'DHCPDISCOVER' and 'DHCPREQUEST' not hitting a server.

all ideas welcome!

thanks in advance,

Paul.

1 reply

by timthetoolman

Hi,

Here is a quote from the site...

http://www.cisco.com/warp/public/779/smbiz/service/knowledge/tcpip/dhcp.htm

(remove spaces from the above URL)

"DHCP uses UDP as its transport protocol. The client sends messages to the server on port(67). The server sends messages to the client on port (68). "

Its a good read for understanding DHCP.

Here is another quote...

"If the server is on another segment, a BOOTP relay agent on the router can be used to transport the request to that segment"

Hope this helps,
Cheers,
Tim.

ps. If that's not the issue, then let me know by posting a comment and I'll continue to help you if I can...

This discussion is closed to new replies.