Discussion Locked

no recognition of some cd-rom-drives

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

soem cd-rom-drives cannot be seen in windows 98se.
how can i solve this situation-in details? i changed from a 12x-cyberdrive 200d to a 16xdrive

9 replies

by cnlson

i would post an answer but you do not rate answers and that is not very nice.

by europanorama

see my other questions about points and rating. the day will come when i will understand this complicating system....due to lack of time i could not check all help-files.

by thechas

Why so stingy with the points?

Anyway, you likely need to install or update the IDE bus-master driver for the chipset on your motherboard.

Make sure that the drive channel in BIOS settings is set to either auto-detect, or CD-ROM.

Chas

by fenaikh

Hi
First check BIos seeting for both IDE are enabled and set to aauto detect.
2- make sure that the CD jumber setting is right.
3- make sure that the cable is firm in both sides motherboard and CD.
4- make sure that the red stripe is in PIN 1.
5- Boot and see if the post will show it.
6- check it in device manager.
7- Set a correct drive for it from device manager.

8- if not these solved plesae post the code if there any in device manger in your qestion so we could add comment.Good luck

Mohamed

by europanorama

the board finally recognized the cyberdrive 200d. maybe i have to install the chipsetdriver. i had troubles when i did this(changing from original windows-driver to the chipset-driver)on an other board.
the points: i still do not know what the points are for. i asked this in an other question. what are the purposes and consequenses when i do not rate(is this giving points)and have no more points. swiss do not need to understand everything...

This discussion is closed to new replies.