Discussion Locked

NT Server 4.0 Installation

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Gentlemen,
When I install NT Server 4.0 on my unit I receive a message that reads; setup can not find hard disk partiton prepared by ms-dos portion of setup. When you run ms-dos setup for NT setup program you must specify a temp drive. I've set thehd in bios as auto and user defineable, formatted the disk and started the install over, but each time to no avail. My previous OS was 98 and I had no problem at all.I use the winnt command under
the i386 dir. The unit is an Asus P5A system bd. AMD 450 KIII chip, 96 MB Ram and 10 GB Fujitsu drive.
Thanking you in advance.

3 replies

by dmiles

Your previous installation had FAT32 file system partition and NT4 will not install on the FAT32 partition.
when setting the partition with FDISK,donot enable LBA,it automatically sets the fat32 partition,answer "no" to the first option,then use the FDISK /MBR
Hit Esc and then type FDISK,set the partition size and format the drive using a FAT16 file system partition.
The other option will be to use partition magic or other partitioning software.You will need a start up or boot disk that has FAT16 system files on it.

This discussion is closed to new replies.